Our Guides

How to Set up GTracing Gaming Chair? – Step-by-Step Guide

Imagine you’ve just brought home your brand-new GT Racing gaming chair. You’re eager to dive into gaming heaven or conquer your workday, but there’s a small hiccup – you’ve got to put the chair together first. Don’t fret! We’re here to guide you through the process with ease.

In this user-friendly guide, we’ll walk you through setting up your GT Racing gaming chair step by step. No complicated tech talk or confusing instructions – just simple, clear guidance to ensure you’re sitting pretty in your new throne in record time.

We’ll cover everything from unboxing to fine-tuning, making sure you understand everything every step of the way. Whether you’re a gaming enthusiast or a desk warrior, step into the realm of gaming chair nirvana today. Let’s make sure you’re ready to begin. 

Here is the GTRacing gaming chair setup guide:

GTRacing Gaming Chair Assembly Guide:

Step 1: Combine C1 and C2 with Screws

  • Begin by locating components C1 and C2 provided in the packaging.
  • Use the provided 10 screws to securely attach C1 and C2 together.
  • It’s important to ensure a tight fit to maintain stability and durability.
  • Before proceeding, carefully remove the base cover located on the base center to access the assembly area.

Step 2: Install Casters and Gas Lift

  • Take the casters included in the package and insert them into the designated slots on the base of the chair.
  • Apply firm pressure to ensure they are securely attached and can rotate smoothly.
  • Next, cover the base center with the base cover, ensuring it fits snugly in place.
  • Insert the gas lift into the designated hole in the center of the base, ensuring it is aligned properly for smooth height adjustment.

Also Check: Are RESPAWN Gaming Chairs Good?: Detailed Review [2024]

Step 3: Install Mechanism and Footrest

  • Locate the mechanism component and position it over the designated area on the base.
  • Secure the mechanism in place according to the provided instructions, ensuring all screws are tightened appropriately.
  • Attach the footrest to the designated area on the chair, ensuring it is properly aligned and securely fastened.
  • Place the rubber rings provided onto the appropriate sections of the footrest for added stability and noise reduction.

Step 4: Connect Seat and Backrest

  • Carefully lift the seat component and position it onto the gas lift mechanism.
  • Ensure the seat slides down onto the gas lift smoothly and securely.
  • Attach the connector located on the backrest to the corresponding area on the seat, ensuring a secure fit to prevent any wobbling or instability during use.

Related: How Much Weight Can A Gaming Chair Hold?

Step 5: Install Armrests

  • Align the screw holes on the armrests with the designated areas on the chair body.
  • Insert the screws provided into the holes and tighten them gradually to ensure a secure fit.
  • It’s essential not to tighten all the screws completely until all components are properly aligned to avoid any misalignment issues.
  • Place washers between the armrests and the chair body for added stability and to prevent damage to the chair’s surface.
  • Take note of the direction of the connector to ensure proper alignment and functionality of the armrests.

Step 6: Attach Headrest and Lumbar Pillow

  • Securely attach the headrest and lumbar pillow to the designated areas on the chair.
  • Ensure both components are properly aligned and securely fastened to provide optimal comfort and support during use.
  • Adjust the positioning of the headrest and lumbar pillow according to personal preference for maximum ergonomic support.

Final Step:

  • After completing all the steps, double-check all connections, screws, and components to ensure they are securely in place.
  • Test the chair for stability and adjust any components as needed to ensure a comfortable and safe seating experience.

And there you have it, brave adventurers! Your GTRacing gaming chair is now assembled and ready to use. It’s like having your very own throne for gaming adventures! So grab your controller, settle into your comfy chair, and get ready to conquer the virtual world. Happy gaming!

Also check: How to Make a Gaming Room in Small Space

Best GTRacing Gaming Chairs to Consider Buy:

A GTRACING gaming chair is designed to fit the needs of professional gamers. Make the right choice, and improve your gaming experience.

Also check: Are RESPAWN Gaming Chairs Good?: Detailed Review

GTRACING GT099: Swivel Recliner with Headrest and Lumbar Pillow

GTRACING GT890MF: Gaming Chair with Footrest Speakers

GTRACING Music Series GT890M: Gaming Chair with Bluetooth Speakers

GTRACING 505: Adjustable Height, Arm Rest, Ergonomic, Rolling, Swivel

How to Recline GTracing Gaming Chair

After setting up an ergonomic GTRacing gaming chair, here are some additional tips:

Back Recline Function: Step-by-Step Guide

  • Initial Position:
    • Begin in an upright seated position with your back against the chair’s backrest and your feet flat on the ground.
  • Locate the Recline Lever:
    • Identify the “RCL” lever located on the side of the chair, usually positioned near the seat base or beneath the armrest.
  • Pull Up on the Lever to Recline:
    • Using your hand, grasp the “RCL” lever firmly and pull it upward in a smooth motion. As you pull the lever, you’ll feel the backrest begin to tilt backward.
  • Adjust to Desired Angle:
    • Continue pulling the lever until you reach your desired recline angle. The backrest will tilt independently with your motion, allowing you to find the most comfortable position for relaxation or gaming.
  • Lock the Recline Position:
    • Once you’ve found your preferred angle, release the “RCL” lever and push it down firmly. This action locks the backrest in place, ensuring it remains stable and secure during use.
  • Resetting to Upright Position:
    • When you’re ready to return to an upright seated position, push your weight forward slightly and simultaneously push the “RCL” lever down to unlock the backrest.
  • Rest Back Gently:
    • As the backrest returns to its normal position, gently lean back against it to support the motion. Avoid sudden movements or excessive force, as this may cause the backrest to rebound rapidly.
  • Ensure Stability:
    • Once the backrest is fully upright, take a moment to ensure that it is securely locked in place. Confirm that the “RCL” lever is fully pushed down to prevent any accidental reclining.

Height Adjustment: How to lower a GTracing Gaming Chair

Height Adjustment: Step-by-Step Guide

  • Starting Position:
    • Begin by sitting comfortably in your GTRacing gaming chair, ensuring your feet are flat on the ground and your back is against the backrest.
  • Locate the Height Adjustment Lever:
    • Identify the “LIFT” lever located beneath the seat of the chair. This lever is typically positioned on the right-hand side, within easy reach.
  • Engage the Lever:
    • Using your hand, grasp the “LIFT” lever firmly and lift it upward in a smooth motion. As you lift the lever, you’ll feel the seat begin to rise.
  • Adjust to Desired Height:
    • While holding the “LIFT” lever in the lifted position, adjust the height of the chair to your desired level. The chair will elevate as you continue to hold the lever up.
  • Release the Lever:
    • Once you’ve reached your preferred height, release the “LIFT” lever. The chair will remain at the selected height, securely locked in place.
  • Lift Body Slightly:
    • To ensure the height adjustment is properly set and to relieve pressure on the mechanism, lift your body slightly off the seat while the chair is in the adjusted position.
  • Test Stability:
    • Sit back down in the chair and test the stability of the height adjustment. Shift your weight and move around slightly to confirm that the chair remains steady and secure.
  • Fine-Tune if Necessary:
    • If the height feels comfortable and stable, you’re all set. However, if you need to make further adjustments, simply repeat the process by lifting the “LIFT” lever and adjusting the height as needed.
  • Enjoy Your Optimized Seating Position:
    • With the height adjustment successfully completed, sit back and enjoy your newly optimized seating position. Whether gaming, working, or relaxing, you can now experience personalized comfort and support tailored to your preferences.
  • Remember Proper Technique:
    • When adjusting the height in the future, always remember to lift your body slightly off the seat to ensure smooth operation and to prevent unnecessary strain on the chair’s mechanism.


How long does it take to assemble a GTRacing gaming chair?

Assembly time varies but typically takes around 30-60 minutes with the provided tools and instructions.

Can I use my GTRacing chair without the lumbar cushion?

While the lumbar cushion enhances comfort and support, it’s not mandatory for use. Experiment to find what works best for you.

Is it normal for the chair to make sounds during reclining?

Some minor sounds may occur during reclining due to the chair’s mechanisms. However, excessive noise could indicate a need for adjustment or maintenance.

Can I wash the seat cover of my GTRacing chair?

Yes, most GTRacing chair covers are removable and machine washable. Follow the care instructions provided to maintain its cleanliness.

How often should I lubricate the moving parts of the chair?

Lubrication needs vary based on usage and environmental factors. Generally, it’s advisable to lubricate moving parts every 6-12 months to ensure smooth operation.

Also check: x rocker ergonomic gaming chair